PX2000UL
Compact, 20,000-lumen, 1-chip DLP laser projector
RB laser with red boost for vivid colour performance
With attractive performance and low maintenance, this single-chip, 20,000-lumen laser projector delivers large venue projection at near 3-chip imaging performance.
Brightness using PX2000UL with NP47ZL.
Weight does not include lens.
Functions and Features
Outstanding Picture through Advanced Laser Technology
Vivid Colour Performance
Producing richly intense colours far beyond that previously possible with 1-chip DLP technology through additional red laser technology, the PX2000UL achieves a wide colour spectrum covering the REC709 standard with unsurpassed brightness for the ultimate experience.
No More Lamp Replacements
Up to 20,000 hours* of maintenance-free operation is possible due to the laser light source while enjoying a Lower TCO. This projector has the ability to control brightness, creating a stable image over longer time periods.
* Actual hours may vary depending on usage conditions.
Dust-proof due to the Cycle Cooling System
PX2000UL has a dust-proof design to prevent the staining of optical components from the ingress of dust and the deterioration of brightness and image quality.
Advanced Installation Capabilities
360 ° Positioning in Any Direction
This projector can be installed universally at any angle. Tilt-free, roll-free and portrait installations are supported. The projector can be rotated freely (360°) to point up or down depending on the installation requirements and can be rotated and installed on its side to create a portrait image.
Geometric Correction
Projection is not confined to a standard flat screen or wall. Geometric correction allows this model to project an image on spheres, cylinders, and many more non-standard surfaces.
Edge Blending Function
The function seamlessly blends multiple projected images to display a single high-resolution image.
Stacking Correction
The feature allows the projectors to boost an image’s brightness up to 80,000 lumens (centre), which is ideal for larger-sized screens and environments with heavy ambient light. This feature also prevents the complete loss of an image, which can happen when using only one projector.
Optional Lenses and Lens shift
Enjoy greater installation flexibility with a complete line of motorized optional lenses (5).
Lens throw distances range from 1 m to 74 m. Wide vertical and horizontal lens shift (50% or 45% vertically and 15% horizontally) is available.
| NP45ZL | NP46ZL | NP47ZL | NP48ZL | NP49ZL | ||
|---|---|---|---|---|---|---|
| Lens type | Zoom lens (Short) | Zoom lens (Short) | Zoom lens (Standard) | Zoom lens (Long) | Zoom lens (Long) | |
| Zoom / Focus | Motorized | |||||
| Zoom ratio | 1.33 | 1.3 | 1.33 | 2.0 | 1.75 | |
| Throw ratio @ 100” | 0.9 to 1.21 : 1 | 1.2 to 1.58 : 1 | 1.49 to 2.0 : 1 | 2.0 to 3.93 : 1 | 4.0 to 6.98 : 1 | |
| Screen size*1 | 50 to 500 inches | 40 to 500 inches | 40 to 500 inches | 40 to 500 inches | 50 to 500 inches | |
| Light output*2 | 18,400 lumens | 18,200 lumens | 19,000 lumens | 18,400 lumens | 18,400 lumens | |
| Lens shift | Vertical | +45%V to –45%V | +50%V to –50%V | |||
| Horizontal | 15%H (Both sides) | |||||
| Weight | 2.7 kg | 2.0 kg | 2.0 kg | 2.7 kg | 2.0 kg | |
*1: Mechanically adjustable range
*2: [PRESET] mode is [HIGH-BRIGHT] and [LIGHT MODE] is [BOOST].
Compatible with Diverse Signal Sources
Equipped with a wide range of inputs, such as HDMI®× 2, DisplayPort™, HDBaseT™,SDI, Computer, DVI-D, and BNC terminals.
Supports HDMI 3D format
Watch videos in 3D using commercially-available 3D emitters that support XPAND 3D and active shutter-type 3D eyewear. Also compatible with 3D images in the DLP® Link format.
HDBaseT Support
Simplify your installations with HDBaseT, which is optimized for video applications and supports uncompressed full HD digital video, audio, Ethernet, power and various control signals.
Terminals
Other Useful Functions and Features
- Eco mode and light source power adjustment
- Centre lens design for easy setup
- Remote control ID
- Direct power on/off, auto power on/off
Network Control
- -NaViSet Administrator 2
- -CRESTRON ROOMVIEW
- -AMX BEACON
- -PJLink
- -HTTP server (projector adjustment)
Specifications
| Model | NP-PX2000UL | ||
|---|---|---|---|
| Projector Type | 1 chip DMD reflection type | ||
| Specifications of main parts | Main panel | Size | 0.96 inch DMD (aspect ratio: 16:10) |
| Resolution | WUXGA (1,920 dots × 1,200 lines) | ||
| Pixels*1 | 2,304,000 pixels | ||
| Projection lenses*2 | Zoom/Focus | Motorized | |
| Lens shift | Refer to Lens specifications | ||
| Light source | Blue laser diode / Red laser diode | ||
| Light source (laser diode) life*2 | 20,000 hours | ||
| Optical unit | C/W type (DLP) | Colour separation by colour wheel; time-multiplexing colour wheel method | |
| Light output*3*4 | Boost mode | 19,000 lumens / 20,000 lumens (centre) | |
| Normal mode | 18,000 lumens / 19,000 lumens (centre) | ||
| Contrast ratio*4 (all white / all black) | 10,000:1 with dynamic contrast | ||
| Screen size | Please refer to the specifications of option lens | ||
| Colour reproduction | 10-bit signal processing (approx. 1.07 billion colours) | ||
| Quietness (ECO mode / ECO mode off) | 43 dB/ 45 dB | ||
| Scanning frequency (Synchronization) | Horizontal | 15 kHz, 24 to 153 kHz | |
| Vertical | 24 Hz, 25 Hz, 30 Hz, 48 Hz, 50 to 85 Hz, 100 Hz, 120 Hz | ||
| Max. display resolution (horizontal × vertical ) | Digital: 2,560 × 1,600 (WQXGA) / Analogue: 1,920 × 1,200 (WUXGA) | ||
| Keystone correction | Horizontal | Manual, Approx. ± 60 Max degrees | |
| Vertical | Manual, Approx. ± 40 Max degrees | ||
| Input/output connectors | HDMI® | Video input | HDMI® Connector type A × 2 Deep Color (colour depth): 8-/10-/12-bit compatible Colorimetry: RGB, YCbCr444, YCbCr422, YCbCr420, REC2020, REC709, REC601 Supports HDCP*5 |
| DisplayPort™ | Video input | DisplayPort × 1 Data rate: 5.4 Gbps/2.7 Gbps/1.62 Gbps, No. lanes: 1 lane/2 lanes/4 lanes Deep Color (colour depth): 8-/10-/12-bit compatible Colorimetry: RGB, YCbCr444, YCbCr422, REC709, REC601 Supports HDCP*5 | |
| HDBaseT™ / LAN port | Video input | RJ-45 × 1, 10BASE-T/100BASE-TX Deep Color (colour depth): 8-/10-/12-bit compatible Colorimetry: RGB, YCbCr444, YCbCr422, YCbCr420, REC709, REC601 Supports HDCP*5 | |
| SDI (3G/HD/SD) | Video input | BNC × 1 Input signals: SMPTE259M, SMPTE292M, SMPTE424M Colorimetry: RGB, YCbCr444, YCbCr422, REC709, REC601 | |
| Video output | BNC × 1 | ||
| Computer | Video input | Mini D-Sub 15 Pin × 1, BNC × 5 | |
| Video output | Mini D-Sub 15 Pin × 1 | ||
| DVI-D | DVI-D × 1 | ||
| 3D Sync | In | BNC × 1, synchronized signal input for 3D use 1920 × 1200 RB 120 Hz, Frame sequential | |
| Out | BNC × 1, synchronized signal output for 3D use | ||
| Trigger 1/2 | Stereo mini jack × 2 | ||
| PC control connector | D-Sub 9-pin × 1, 9600 bps | ||
| Remote connector | Stereo mini jack × 1 | ||
| Usage environment*6 | Operating temperature: 5 to 40°C*7, operating humidity: 0 to 80% (with no condensation) | ||
| Storage temperature: –10 to 60°C, storage humidity: 0 to 80% (with no condensation) | |||
| Operating altitude: 0 to 4,200 m | |||
| Power requirement | 200 – 240 V AC, 50/ 60 Hz | ||
| Power consumption | Light mode - Boost | 1,922 W | |
| Light mode - Normal | 1,779 W | ||
| Light mode - ECO | 1,461 W | ||
| STANDBY (ON) | 0.48 W | ||
| STANDBY (OFF) | 0.4 W | ||
| Input current | 9.7 A | ||
| Dimensions ( W× H× D) | 530 × 248 × 745 mm (not including protruding parts) | ||
| Weight | 51 kg (not including lens) | ||
- *1:Effective pixels are more than 99.99%.
- *2:Time at which the laser light source is at half brightness; not a guarantee time.
- *3:This is the light output value that results from setting [LIGHT MODE] to [NORMAL] and setting [PRESET] to [HIGH-BRIGHT] while using the NP47ZL lens (sold separately).
The light output value is lower when setting [LIGHT MODE] to [ECO]. If any other mode is selected as [PRESET] mode, the light output value may drop slightly. - *4:Compliant with ISO21118-2012.
- *5:If you are unable to view material via the HDMI, DisplayPort or HDBaseT input, this does not necessarily mean the projector is not functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision/ intention of the HDCP community. (Digital Content Protection, LLC).
- *6:Depending on the altitude and temperature, the projector goes into “Forced ECO Mode”.
Throw Distance and Screen Size
| Screen size ( W × H) | Lens model name | ||||
|---|---|---|---|---|---|
| NP45ZL | NP46ZL | NP47ZL | NP48ZL | NP49ZL | |
| 50" ( 1.08 × 0.67) | 0.9-1.3 | 1.2-1.6 | 1.6-2.1 | 2.2-4.3 | 4.4-7.6 |
| 70" ( 1.51× 0.94) | 1.3-1.8 | 1.8-2.3 | 2.2-3.0 | 3.1-6.0 | 6.1-10.6 |
| 100" ( 2.15 × 1.35) | 1.9-2.6 | 2.6-3.4 | 3.2-4.3 | 4.3-8.5 | 8.6-15.0 |
| 120" ( 2.59 × 1.62) | 2.3-3.2 | 3.1-4.1 | 3.9-5.2 | 5.1-10.1 | 10.3-18.0 |
| 150" ( 3.23 × 2.02) | 3.0-4.0 | 3.9-5.2 | 4.9-6.5 | 6.4-12.6 | 12.8-22.5 |
| 180" ( 3.88 × 2.42) | 3.6-4.8 | 4.8-6.2 | 5.9-7.8 | 7.6-15.1 | 15.4-26.9 |
| 200" ( 4.31 × 2.69) | 4.0-5.3 | 5.3-6.9 | 6.5-8.7 | 8.5-16.8 | 17.1-29.9 |
| 250" ( 5.39 × 3.37) | 5.0-6.7 | 6.7-8.7 | 8.2-10.9 | 10.5-21.0 | 21.3-37.3 |
| 300" ( 6.46 × 4.04) | 6.0-8.0 | 8.0-10.4 | 9.8-13.1 | 12.6-25.1 | 25.5-44.8 |
- *Stated projection distances are standard values from lens or mirror surface to screen centre.
- *For a stack installation, the recommended projection distances will be different.
- *The values in the table are design values and may vary.
![[NEW WINDOW]](/nf_global/v2/common/img/icon/window-01.png){kind=icon}
Projector throw distance simulationCabinet Dimensions
Accessories
Remote control (included accessory)
Options
Lenses
NP45ZL (Throw ratio 0.9 – 1.2)
NP46ZL (Throw ratio 1.2 – 1.56)
NP47ZL (Throw ratio 1.5 – 2.0)
NP48ZL (Throw ratio 2.0 – 4.0)
NP49ZL (Throw ratio 4.0 – 7.0)
- Do not stare into the lens while in use.
- This product is equipped with a laser module.
CLASS 1 LASER PRODUCT conforming to IEC 60825-1, Third edition, 2014,
and RG3 of IEC/EN 62471-5, First edition, 2015. - The projector can be unplugged during its cool down period after it is turned off.
Parts of the projector become heated during operation.
Use caution when picking up the projector immediately after it has been operating.
![[PDF]](/nf_global/v2/common/img/icon/pdf-01.png){kind=icon}
Brochure Download : WDPJ-2003-0013N.pdf (2.28MB)NaViSet and GEOMETRIC CORRECTION are trademarks or registered trademarks of NEC Display Solutions, Ltd. in Japan, the United States and other countries.
DLP and the DLP logo are registered trademarks or trademarks of Texas Instruments.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
DisplayPort and DisplayPort logo are trademarks owned by the Video Electronics Standards Association in the United States and other countries.
HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
CRESTRON and CRESTRON ROOMVIEW are trademarks or registered trademarks of Crestron Electronics, Inc.
PJLink is a trademark applied for trademark right in the United States of America and other countries.
AMX is a trademark or registered trademark of AMX LLC in the United States and other countries.
All other brand or product names are trademarks or registered trademarks of their respective holders.
All specifications and the product’s design are subject to change without notice. March 2020
©2020 NEC Display Solutions, Ltd.
Further trademark information
