File Description
Firmware
MultiPresenter Stick (DS1-MP10RX) Update Software
This software will update your firmware with the following features.
New features in Version 1.03
- Update for the KRACK WPA2 Vulnerability.
New features in Version 1.02
- Check file format of image file if it can be registered as wallpaper.
New features in Version 1.01
- Support connecting to networks via wired LAN. (*)
- Automatically select the wireless LAN channel.
- Limit the communication speed of MultiPresenter function.
- PIN code-connection in all wireless LAN operation modes.
NP-P502H/NP-P502W/NP-P452H/NP-P452W/NP-CR5450H/NP-CR5450W Update Software
This software will update your firmware with the following features.
New features in Ver.1.05
- Incorporation of requirements set out under the EU Radio Equipment Directive (RED) 2014/53/EU.
- Improvement of connectivity with PJLink / Crestron RoomView®.
New features in Ver.1.04
- Enhanced features for MultiPresenter.
- Addition of PIN CODE connection.
- Addition of INTELLIGENT CONNECTION.
- Improvement of connection capability with Image Express Utility 2.0.
NP-P502HL-2/NP-P502WL-2/NP-P502HL/NP-P502WL/NP-CR5450HL/NP-CR5450WL Update Software
This software will update your firmware with the following features.
New features in Ver.3.01
- Incorporation of requirements set out under the EU Radio Equipment Directive (RED) 2014/53/EU.
- Improvement of connectivity with PJLink / Crestron RoomView®.
New features in Ver.3.00
- Enhanced features for MultiPresenter.
- Addition of PIN CODE connection.
- Addition of INTELLIGENT CONNECTION.
- Improvement of connection capability with Image Express Utility 2.0.
New features in Ver.2.02
- Enhaunced features of the WEB SHARING.
- Supporting multiple languages.
- Addition of the SAVE BUTTON.
- Addition of the DELETE ALL PAGES.
- Improvement of connectivity with the Miracast function.
NP-PA653U/PA703W/PA723U/PA803U/PA853W/PA903X Update Software
This software will update your firmware with engineering changes shown below.
The improvement in Ver.1.04
- Improvement of function when using Option Lens NP41ZL.
- Added compatibility for Option Lens NP43ZL.
NP-PA653UL/NP-PA803UL Update Software
This software will update your firmware with engineering changes shown below.
Firmware Ver.1.04
- Added compatibility for Option Lens NP43ZL.
Firmware4 Ver.1.03
- This firmware maintains stable color temperature and brightness for long term operation.
Firmware4 ver.1.03 / Setting date ver.1.07
- This firmware maintains stable color temperature and brightness for long term operation.
In order to receive the above mentioned firmware and data, please contact NEC Tech Support for your region.
NP-UM352W Update Software
This software will update your firmware with the following features.
New features in Ver.1.09
- ncorporation of requirements set out under the EU Radio Equipment Directive (RED) 2014/53/EU.
- Improvement of connectivity with PJLink / Crestron RoomView®.
New features in Ver.1.08
- Improvement of the behavior of REMOTE PEN OFF/ON button in APPS MENU.
Software
ProAssist
ProAssist is software for controlling the projector and adjusting the projection screen from a computer via a network.
It allows necessary adjustments to be carried out smoothly when combining several projectors together to project a large screen in a classroom, meeting room, hall etc.
MultiPresenter
MultiPresenter is an application software which enables you to display your device's screen(computer, smart phone, etc.) on the receiver device(projectors) via wired or wireless LAN.
NEC Software Utility Installation Guide (4th edition)
"NEC Software Utility Installation Guide" gives an overview and describes the use of the following software. Look over this guide in conjunction with the Help function of the software programs.
- Dynamic Image Utility 2.0
- Image Express Utility 1.0
- Viewer PPT Converter 2.0
eBeam Interactive
Like a USB mouse, using the electronic pen enables you to operate the personal computer. Furthermore, assuming that the projector screen as a white board, any characters and figures can be drawn on it using the electronic pen.
Geometric Correction Tool
"The Geometric Correction Tool " corrects geometrical distortion of an image projected onto a special shaped screen such as a cylindrical screen, and a spherical screen from the projector. This program allows you to control the projector via a computer. .
Image Express Utility 2.0
"Image Express Utility 2.0" is a software tool used to send the screen of your personal computerto the projector via a network, without the signal cables.
- NEC's original compression algorithm allows high-quality images to be sent over the networkat high speed, from your personal computer to the projector.
- Images can be sent from a personal computer to not only one projector but also to two ormore projectors at the same time.
Image Express Utility Lite
Image Express Utility Lite is software that projects a PC's display on a projector. It allows the PC's display to be transferred to a projector using the network with high quality and at high speed.
- USB Display
- Computer's screen image can be projected via a USB cable, without connecting a computer cable (VGA).
- Just connecting the computer and the projector over a USB cable will make the USB Display function available (Plug & Play) even without installing Image Express Utility Lite on the computer.
- Image transmission
- The screen of your computer can be sent to the projector via a wired or wireless network without a computer cable (VGA).
- By using "EASY CONNECTION" function, the complicated network settings can be simplified and the computer will automatically connect to the projector.
- Geometric Correction Tool (GCT)
- The Geometric Correction Tool (GCT) function allows you to correct distortion of images projected even from an angle.
[NOTE] For the models M350X/M300X/M260X/M230X/M300W/M260W, Import, Export and Delete of the "Geometric Correction" setting cannot be done to the projector when the firmware version is "1.01" or lower.
- The Geometric Correction Tool (GCT) function allows you to correct distortion of images projected even from an angle.
- Sound transmission
- When connected to a projector supporting the sound transmission function, the sound is transmitted along with the images.
* For the available models of this function, please refer to "Supported Projector" column.
- When connected to a projector supporting the sound transmission function, the sound is transmitted along with the images.
- Movie streaming
- Movie files on your computer can be transferred to the projector via the network and played on the projector.
* For the available models of this function, please refer to "Supported Projector" column.
- Movie files on your computer can be transferred to the projector via the network and played on the projector.
- Multiple connections
- It enables that the multiple terminals connects to a projector.
- The screen images of the multiple terminals can be displayed on the projector's screen, by the split screen mode or the full screen mode.
* For the available models of this function, please refer to "Supported Projector" column.
Image Express Utility Lite for Mac OS
Image Express Utility Lite for Mac OS is software that projects a computer's display on a projector. It allows the computer's display to be transmitted to a projector using the network with high quality and at high speed. Image Express Utility Lite for Mac OS runs on Mac OS X 10.6 or 10.7, 10.8, 10.9, 10.10 and 10.11. It doesnot run on Mac OS (PowerPC).
- The screen of your computer can be sent to the projector via a wired or wireless network without a VGA cable.
- By using "EASY CONNECTION" feature, the complicated network settings can be simplified and the computer will automatically connect to the projector.
- The screen of your computer can be sent to up to four projectors at the same time.
MirrorOp Sender Lite for Mac
MirrorOp Sender Lite for Mac is software program for connecting the projector and computer by wireless LAN, sending the computer’s screen to the projector and projecting it on the projector’s screen.The computer’s screen can be projected on the projector’s screen wirelessly.
MirrorOp Lite for Windows
MirrorOp Lite for Windows is software program for connecting the projector and computer by wireless LAN, sending the computer’s screen to the projector and projecting it on the projector’s screen.The computer’s screen can be projected on the projector’s screen wirelessly.
PC Control Utility 1.0
Software used to control a projector with a personal computer. It can be changed the background image, which is displayed in the absence of an input signal.
- *This function is used with the projector and the personal computer connected by a serial cable.
PC Control Utility 3.0
"PC Control Utility 3.0" is software that allows you to operate the projector from the personalcomputer when the personal computer and the projector are connected with LAN (wired or wireless) or a serial cable(RS-232C).
PC Control Utility Pro 3.0
"PC Control Utility Pro 3.0" is a program for controlling the projector connected through various communications methods (LAN or serial), for operating and managing the projectors.
PC Control Utility Pro 4 / 5 for Mac OS
The software controls the power on/off switching, the input signal switching, and other functions of the connected projector, and manages the lamp usage time and wide variety of other information.
The software also permits control of the projector according to a specified schedule, and can send e-mail when an error has occurred with the projector.
PtG2 Converter (for Windows)
PtG2 Converter is MobiShow®-proprietary software for conversion of Powerpoint from .ppt into .ptg2 format.
Viewer PPT Converter 3.0 (Supported Windows 2000)
"Viewer PPT Converter 3.0" is software that converts files created with PowerPoint 95/97/2000/2002/2003/2007 into an index file that can be displayed with the viewer function of the projector.
- If PowerPoint 2000/2002/2003/2007 is installed in your personal computer, you can activate Viewer PPT Converter 3.0 from PowerPoint (PPT Converter add-in is automatically registeredto PowerPoint).
Viewer PPT Converter 3.0
"Viewer PPT Converter 3.0" is software that converts files created with PowerPoint 95/97/2000/2002/2003/2007/2010 into an index file that can be displayed with the viewer function of the projector.
- If PowerPoint 2000/2002/2003/2007/2010 is installed in your personal computer, you can activate Viewer PPT Converter 3.0 from PowerPoint (PPT Converter add-in is automatically registeredto PowerPoint).
Virtual Remote Tool (Supported Windows2000)
"Virtual Remote Tool" is software for operating a projector from a computer; the projector is connected with a computer connection cable (signal cable).
The following projector operations are possible from the personal computer:
- Power on / off
- Input signal switching
- Muting (temporarily disabling audio / video)
- Freezing (locking the projected image)
- Operating Remote Control
[Note]
Use the supplied VGA signal cable for your projector. This function may not work depending on the specifications of your connected computer or your graphics adaptor and the version of your driver.
Virtual Remote Tool
This is software for operating a projector connected by LAN (wired or wireless), serial connections (RS-232C) or computer connection cable (signal cable) from the computer.
The following projector operations are possible from the personal computer:
- Power on / off
- Input signal switching
- Muting (temporarily disabling audio / video)
- Freezing (locking the projected image)
- Operating Remote Control
- The logo image transmission
[Note]
Logo image transmission and computer cable connection are not possible depending on the projector types.
Use the supplied VGA signal cable for your projector. This function may not work depending on the specifications of your connected computer or your graphics adaptor and the version of your driver.
If you're using some projectors, the remote control button names in this software might not match the input terminal names on each unit.
IWB Setup Software / EyeRIS NEC edition
"IWB Setup Software / EyeRIS NEC edition" is driver and calibration software for Interactive White Board Kit and a camera device on supported projector.
E-board software [eBeam]
As well as entering notes and text on the screen, it can also operate as a mouse. You can save diagrams written in PowerPoint as Objects.