This download page is for Firmware in the displays.

M321

• Rev.3.1

1. Improved the MP function
2. Improved the FW update function

• ※If you update from FIRMWARE Rev.2.0 or lower, the HTTP server password will be initialized.
• ※Please note that if you use the HTTP server, you will need to set a password.

• More

Check the Firmware version of the display from "OSD - MONITOR INFORMATION" on screen menu.
If either of the versions is older than the following versions, needs to update the Firmware.

Firmware Version
Rev.3.1 REVISION:R3.101

OSD-SYSTEM-FIRMWARE

You can check the REVISION of your Firmware on the following OSD screen.

Updating Procedure by LAN cable and Computer.

Preparation

1. LAN cable (Not supplied)
2. Computer
   (※ Connection method to the display from a computer, be sure to read "LAN Control" on the user's manual)

Follow the instruction below to update the Firmware.

File Name	File Size
Firmware Update Procedure by HTTP Server M321_Firmware_Update_Procedure_by_HTTP_server_E(Rev.1.1).pdf	433KB

Updating Procedure by USB Memory.

Preparation

1. USB Memory (Not supplied)

Updating of the firmware by USB memory.
Follow the instruction below to update the Firmware.

File Name	File Size
Firmware Update Procedure by USB Memory M321_Firmware_Update_Procedure_by_USB_E(Rev.1.1).pdf	180KB

Go to Download

Note: Download the compressed file from below and unzip the FIRMWARE image file.
The unpacked file includes the following one image file (PAC file).

File Name	Unpacked File Name
Rev.3.1 Firmware download file SNDS_FIRMWARE_IMAGE_FILE.zip（11.4MB）	FIRMWARE_M_SERIES_R3101.pac