PC Control Utility Pro 5 for Mac OS
Version : Ver.1.21
NaViSet Administrator 2
Download NaViSet Administrator 2 supporting latest Projector from following link.
Overview
"PC Control Utility Pro 5 for Mac OS" controls the power on/off switching, the input signal switching, and other functions of the connected projector, and manages the lamp usage time and wide variety of other information.
The software also permits control of the projector according to a specified schedule, and can send e-mail when an error has occurred with the projector.
Correction point to Ver.1.21
Ver.1.19 → Ver.1.21
- Support of NP-PX601W / NP-PX671X
Operating Environment
PC Control Utility Pro 5 for Mac OS can be used with the following OS and projectors.
Supported Projector (MODEL NO.)
- NP4100 / NP4100W (firmware version 1.02 or later)
- NP3250 / NP2250 / NP1250 / NP3250W
- NP3151W / NP3150 / NP2150 / NP1150 / NP905 / NP901W
- NP3200 / NP2200 / NP1200 / NP3201 / NP2201
- NP630 / NP530
- NP610 / NP510 / NP510W / NP410 / NP410W / NP310 / NP610S / NP510WS
- NP600 / NP500 / NP400 / NP300 / NP500W / NP600S / NP500WS
- NP216 / NP215
- NP-M350X / NP-M300X / NP-M260X / NP-M230X / NP-M300W / NP-M260W
- NP-M350XS / NP-M300XS / NP-M260XS / NP-M300WS / NP-M260WS
- NP-M353HS / NP-M323HS / NP-M303HS
- NP-M361X / NP-M311X / NP-M271X / NP-M311W / NP-M271W
- NP-M402W / NP-M362W / NP-M402X / NP-M362X / NP-M322X / NP-M282X / NP-M322W / NP-M352WS / NP-M302WS / NP-M332XS / NP-M402H / NP-M322H
- NP-M403W / NP-M363W / NP-M323W / NP-M403X / NP-M363X / NP-M323X / NP-M283X / NP-M353WS / NP-M303WS / NP-M333XS / NP-M403H / NP-M323H
- NP-M420X / NP-M420XV
- NP-P420X / NP-P350X / NP-P350W
- NP-P501X / NP-P451X / NP-P451W / NP-P401W
- NP-P502H / NP-P502W / NP-P452H / NP-P452W
- NP-P502HL / NP-P502WL
- NP-PE401H
- NP-PA600X / NP-PA500X / NP-PA550W / NP-PA500U
- NP-PA622U / NP-PA522U / NP-PA672W / NP-PA572W / NP-PA722X / NP-PA622X / NP-PA621U / NP-PA521U / NP-PA671W / NP-PA571W / NP-PA721X / NP-PA621X
- NP-PH1000U
- NP-PH1202HL / NP-PH1002HL
- NP-PH1400U / NP-PH1200U
- NP-PX581W / NP-PX651X
- NP-PX601W / NP-PX671X
- NP-PX602UL-WH / NP-PX602UL-BK / NP-PX602WL-WH / NP-PX602WL-BK
- NP-PX620X / NP-PX550W
- NP-PX750U / NP-PX700W / NP-PX800X
- NP-PX803UL-WH / NP-PX803UL-BK
- NP-U300X / NP-U250X / NP-U310W / NP-U260W
- NP-U321H
- NP-UM330X / NP-UM280X / NP-UM330W / NP-UM280W
- NP-UM351W / NP-UM301W / NP-UM361X / NP-UM301X
- NP-UM352W
- NP-V300X / NP-V260X / NP-V300W / NP-V260W
- NP-V311W / NP-V281W / NP-V311X
- NP-V332W / NP-V332X / NP-V302W / NP-V302X / NP-V302H
- VT800
Supported OS
- Mac OS X 10.6 Snow Leopard
- Mac OS X 10.7 Lion
- OS X 10.8 Mountain Lion
- OS X 10.9 Mavericks
- OS X 10.10 Yosemite
- OS X 10.11 El Capitan
Installation instruction
- In Finder, Control-click ("control"+ click) or right-click on the PC Control Utility Pro 5.pkg that you downloaded.
- Select "Open" from the top of contextual menu that appears.
- Click "Open" in the dialog box. If prompted, enter an administrator name and password. Once the installation has started, follow the instructions on the installer screens to complete the installation.
Method of starting
From the application selection screen, click [PC Control Utility Pro 5] - [PC Control Utility Pro 5].
Go to download
Sorry, you cannot download these contents on this page from Cuba, Iran, Korea(North), Syria, Ukraine(Crimean region). These software programs and manuals subject to U.S. Export Administration Regulations. We shall not reexport or release them to the national below, without a license by BIS (a section of U.S. Government).
Notification: About the company name in the “Software License Agreement”
The company name described in the “Software License Agreement” for the software is the old company name.
Please read the company name as the new company name.
Old: NEC Display Solutions, Ltd.
New: Sharp NEC Display Solutions, Ltd.
Click the filename from the following list.
language | file name | file size |
---|---|---|
English | PC Control Utility Pro 5 for Mac OS ( Ver.1.21 ) PCCUP5_121pkg.zip |
50.4MB |